First of all, it's a corner facing desk! Props for that. 99.9% of L shaped corner desks, you're supposed to sit on one end or the other, not facing the center corner. I like the extra leg room and being able to stick a footstool under the desk and having my legs stick through the back of the desk, and that can only happen... in the corner. Else the wall is in the way. Or, you have to have the desk pulled away from the wall, taking up more space. Plus I like having the extra desk space on either side of me, and this desk certainly has that. It has plenty of room for my Super Geek setup. I have a gaming PC, Ultrawide Monitor, 34" TV, PS4, PS3, Xbox, N64, Super Nintendo, and Nintendo Switch all on this desk.

Secondly, this desk is sturdy. I have an 80 lb, liquid cooled, beast of a gaming PC, and I had no qualms about placing it up on the desk, and knowing it would be fine. Hell, I'd have felt comfortable standing on the damn thing. I've bought several corner facing desks trying to find one to fit all my criteria and this is the only desk I've had succeed. And a sturdy desk is one thing I was worried about, but this met and exceeded my expectations. That sturdiness comes with a cost, it took a long time to assemble. There are a lot of bolts needing placed and tightened. And it was quite the time consuming process. But well worth it. I read a lot of reviews about poor instructions and inferior manufacturing, I can only assume user error for the most part, or they were unlucky. The instructions weren't perfect though, it missed some steps about using particular bolts in one or two spots, which if you don't know what you're doing might cause problems. And at the end, it said use one type of bolt, when actually the other one is needed. But other than that, it was pretty easy to follow.

As for packaging, I can see how things might get damaged in shipping, but that's the case with anything I think. I thought it was pretty remarkable how well this desk was shipped in such a small box. Whomever came up with the packaging, is a 3D Tetris master. I thought it was quite impressive how much space they managed to utilize.

I love the style. The color of the Black Oak wood design is beautiful I think.

If I had any criticism of the product for the manufacturers, it would be:

1) Take some time and improve the assembly instructions.

2) Send some better quality tools to assemble it. These were ridiculously cheap and uncomfortable to use.

This is such a gorgeous desk and the quality is great for the price. It feels sturdy and professional! The assembly wasn't too bad, I did it on my own in about 2 hours with no extra tools other than what was provided in the box. The only feedback that I have for buyers is to leave all bolts that secure the desk top to the base loose until you have it all together. I ended up with a small gap between two of the pieces and I got very worried for a second but after I loosened the bolts and pushed them together while tightening them, it fixed that problem! I would absolutely recommend this desk.

Its not often that you find a corner-facing desk such as this. Its totally perfect! Once completed, I am extremely happy with this product. The building of this desk spanned about 2.5 hours, and was a bit of a cluster. The directions to put this together don't have a lot of descriptions. It labels the pieces and screws & shows you where to put them all, but with no explanation. There was a moment of frustration when my partner was trying to put the crossbars for the corner on and it was pushing the rest of the frame out. Looking VERY closely at the pictures we then figured out that we screwed in the crossbars incorrectly, and after the correction, the rest of the desk went together perfectly. As for space, I have a large curved monitor and two laptops that fit on this desk with plenty of elbow room to spare. I'm also rather tall and there is ample room underneath if you want to place a footrest or use for extra storage. Overall, I'm totally in love!

TLDR: Desk is huge, really awesome, and sturdy. Being able to customize the shelves to fit a computer tower is easy. May be a bit of a project to put together but well worth the result!

I read the 1 star reviews and got a bit worried to buy this desk. When it arrived it took a good few hours to put together, trying to be careful with instructions to be sure it wasn't user error messing me up. Got to the part where you're installing bars #11 and #12 (the T shaped ones), and got the 1 star complaint of "too short piece/pieces don't connect right!" Checked the whole build up and down again cause I even compared the lengths of these two parts and knew they SHOULD fit together. Realized that parts #13 and #14 (corner bars) are supposed to be installed on the outside of the desk, not the inside. My pictures show my screw up.

The instructions did not mention this info, along with the step of installing some D screws into the ends of the T-bars. Otherwise instructions worked out pretty well. Wasn't shorted any parts/screws, and the desk fit together just right. Definitely agree with the other comments about not screwing all screws fully until the end. But there are a lot of screws so make sure to pick a starting point and loop back to it.

Other than that, the desk is great! I think it's just what I needed for my work from home situation. Pretty sturdy, but I'm on carpet so that might help. Something I need now is cable management stuff.

We bought this to replace what you see in the first photo which we have had for many years. That one served it's purpose as a personal space but when it became apparent that my wife would be working from home permanently she needed more working area. For starters this desk sets closer to the corner and allows for more usable area directly in front of the monitors. Since she uses two monitors as well as her laptop we went with the AMERIERGO Triple Monitor Stand Riser because of the ability to angle the two outside risers. This made it very easy to fit to the angled area of the new desk. This also gave us a place to put the docking station under the right riser out of the way.

The assembly is not difficult but you have to pay attention to be sure as you build it on the floor you don't get the orientation of some parts incorrect. As others have said, be sure to put parts 13 &14 on the back side of the frame so all the holes in the top will properly line up. You will know you did this right when the angled cuts in those parts fit against the back legs. leave everything just snug enough to keep moving with the assembly but be sure all the holes for the wood pieces line up. Then go around and tighten things randomly as you would a rim on a car. I pushed the tops together a couple times as I was tightening things to keep the seams tight.

All in all we are both very happy with this desk as well as the 3 section riser which is plenty strong and useful.

I bought this desk to replace a smaller standing desk I had, because I didn't have a enough room for a three monitor set-up and I wanted something to sit in the corner. For the price, this really checked a lot of things off my needs.

> Assembly: If you follow the instructions - which I did this on my own in about three hours - take your time and read - you should not have a problem, however some parts didn't line up quite right the first time, but a simple untighten, brace and retighten aligns things well. Overall the frame and the particle board came packaged and damage free.

> I saw people complained of gaps between the wing panels and the central panel. I didn't have that experience, the wooden pegs fit in just fine, and the gap is very miniscule on my desk, also have a gaming mat covering most of the desktop so not like I see it anyways.

> I used a power drill with a hex bit on the lowest settings possible to help speed things up - no issues with this - if you're not power tool savy, they give you basic tools in the kit - I just have diminshed hand strenth and using a power drill made sure things were bolted down correctly.

Overall it fits the three monitors I use for work (one of them is my main gaming screen that is curved.) The finish looks great. I added additional LED strip lights behind it and it looks great. I'll update with pics after I clean up my office. But overall if you're looking for a spacious desk that doesn't break the bank, I'd recommend this for sure!

I wasn't sure if I was going to like this desk or not, but I LOVE it. I love the marble top design and the shelves on each side that fit books and my printer. It is bigger than I expected but I that doesn't bother me, I need a large space to work at. I like that there is plenty of room on the desktop without it feeling cluttered. My only fuss is that this was a BEAST to put together by myself. I did lay out all the pieces and arranged them in numerical order first, which helped. You have to read the directions CAREFULLY or pieces will be put together backwards or upside down. I ended up placing the 9&10 pieces with the bolts facing up, got all the way to the end (putting the desktop on) and realized I would have to take that whole things apart to rotate the piece so the desk tops would sit flush against the bar. Once you get going though, it comes together pretty quickly. There are a lot of parts and pieces so staying organized is key while putting this together. Other than that small gripe, I love this desk and actually want to work on work stuff at home :) I highly recommend this item.

IF YOUR TOP PIECES DON'T FIT RIGHT, READ THIS REVIEW.

This is a good sturdy desk with lots of leg room once you get it together right, but there's one part in the picture instructions that is easy to miss. I'm gonna cut to the chase here since so many reviews reference the top pieces having gaps.

Me and my partner tried twice to put this desk together. Both tImes the wooden top pieces had gaps because the frame was crooked. We couldn't figure it out. We were cranky after the second go and even looking at the return policy. We took it apart and tried again and found our mistake!

There are diagonal pieces in the back corner of the desk. Pieces 13 & 14. The ones that have wings on them, where the monitor stand would screw in.

**The wings need to go against the *back* of the frame.**

See attached pictures. It's an easy thing to miss, and if you put the wings on the front side of the frame, the side of the frame that your legs would be on under the desk, the top wooden parts won't line up properly nor will the screw holes.

Now that we got it together properly I love this desk! It's beautiful and sturdy and I'm really happy with it.

Justo lo que buscaba! No me quedo a deber nada! Práctico, funcional y sobre todo cómodo! Me hubiera gustado que incluyera una cajonera pequeña, pero buscaré una que haga juego! Muy recomendable!