Bought one set to try it out, then I bought a second one after using for a few months. I do recommend!

Water Leak Sensor 4

Changed from the finger type to the one that clamps on valve stem. Had to change out the valve to better clamp the operator on the valve. Used Sharkbite fittings with PEX 1Inch

Water Leak Sensor 1

An amazing device. I’m controlling lights with it that are about 400 feet away from the YoLink hub.. Easy to set up and easy to program on and off times.

I use it with a remote motion sensor. I'm on a remote property, and my gate is some distance away from my door. I love knowing when someone comes through the gate. I've quickly become dependent on this device.

I considered YoLink and also the moen flow algorithm system and ultimately opted for the sensors expecting a more reliable system. My plumber installed the valve and installed the base unit and 24 sensors in a 5 BR spread out house and it all communicates seamlessly and was relatively easy to set up after I took time to label and name each sensor before registering them in the app for my location. All is working well!

They just work! Great product.

Received quickly and accurately. Products are working already and were easy to set up

Thank you for creating a local hub, it works great and was very easy to setup!

NSF Certified YoLink FlowSmart All-in-One Smart Water Meter & Auto Shutoff for 1.5" Pipes, LoRa Long-Range, Real-Time Leak Detection, 10-Year Battery, 80+ Device Ecosystem, Hub Required

This smart plug is more than a power controller, but it monitors power usage in detail. Like a Kill-a-watt monitor, with a graphical minute by minute record of what power was used. When you open the device on the YoSmart App, you can see usage during the prior 24 hours, with each peak and valley. Then if you select a longer range analysis, you can see how much power was consumed each day, hour or month. This data can also be downloaded for analysis in excel or other software. I use this on a fridge that I use occasionally, so I can also turn it on and off when needed, and then I can see how much power the fridge is using. With other applications you can turn lights or heaters on and off on a schedule as desired, and then see how much power was used. I have an extra one just so I can check the power usage of different devices. If you like to keep track of power usage this is a great device!!

Once I got this set up, it has been extremely useful to have. It is reliable and easy. I've become dependent on it in a very short period of time. Thank you.

I recently found one of my 10 outdoor motion sensors had fallen off its perch. It was the double sticky tape I had used to mount it. I had used this tape for all of the sensors as they are lightweight and none had dropped before but this one did twice. It still works and so do the other 9 which have been up for years. I think I may replaced the batteries in one or two of the older ones but mostly the batteries last for years (some of them for 4 or more years). Because I trust these I decided to buy a couple more as spares just in case or if I find a new application for them. They integrate well with home assistant and as such they can be used to trigger lights or cameras. I just wish there was a way to improve their mounting as they only swivel vertically. Being able to swivel them horizontally would be an improvement (my only criticism).

After old refrigerator died while we were on a trip, we didn't know it had failed until we returned and found a stinky mess. The sensor in the freezer has worked very well for 3 years, and now the sensors in the new refrigerator, freezer compartment and beverage cooler are in place and inform us at a glance that everything is working as it should.