3D models database | Printables.com

Each month, we pick one creator from the Printables community and give them a bit more space: to show their models, talk about how they design, and choose a theme for a community challenge. It is a way to say thanks, but also a way to show the real p

July 1, 2026

10 min

Some folks have already seen some of my announcements, updates and discussions about a Prusa CORE One Mini on various platforms like Reddit. After a few setbacks up until November 2025, the project was put back to the drawing board for the third time

June 28, 2026

10 min

304

9,403

soozafone

@soozafone

It's been more than two years since I released Dummy 13 here on Printables. That was the culmination of what I called the “13 Series,” a set of models allowing anyone to customize their own humanoid action figure.
Since then, I've explored in a few d

February 13, 2026

4 min

1.1K

151

20,486

Martin

@Martin

Greetings everyone. So, after more then 4 months of work, the DHD is finally finished. Or rather my part is done. It is printed and assembled and painted. Now it will go to the customer for the electronic fitting, lights and sounds so that it could b

October 4, 2025

2 min

721

147

13,715

Martin

@Martin

Greetings my friends.
So, I wanted to try this new Article feature and show you the progress on my DHD.

August 21, 2025

1 min

480

7,387

It's a little meta, we know, but what better way to announce our new Articles feature than by writing an article about it? We hate cooking recipes where you first have to hear about the author's grandma's life story and only get to the ingredients an

August 10, 2025

4 min

145

2,931

EasyPrint Changelog – April 30, 2026
🚀 New Features
Sequential PrintingYou can now choose to print whole objects sequentially (one by one)! This highly anticipated feature includes a smart auto-arrange function that carefully positions objects to pre

April 30, 2026

5 min

3,605

Mikolas Zuza

@MikolasZuza

I’ve never been much of a “car guy,” but now that I drive my Mazda 3 (red, obviously) I have to admit - I love this car! It doesn't have any ultra fancy features, but the original owner did select the wireless key fob option. And it is great. Well, m

August 8, 2025

5 min

158

7,323

soozafone

@soozafone

This past weekend was 3DPrintopia 2025! It's one of the world's largest annual gatherings of 3D printing hobbyists, creators, and companies - and it happens to be a short drive from Lucky 13 home base.
After attending last year's event, I decided thi

September 29, 2025

3 min

125

2,521

Ondřej Stříteský

@OndrejStritesky

3D printing provides the opportunity to make things that are not easily produced by other technologies, and literally change our possibilities. Thanks to the ingenuity and creativity of the community surrounding 3D printing, there are many interestin

November 4, 2025

11 min

121

2,270

When we introduced official Brand profiles on Printables, the goal was to change how big companies think about 3D printing. Why not give fans the real files? Replacement parts, accessories, cosplay props — made available directly, instead of forcing

September 22, 2025

2 min

4,402

Nomads Galaxy

@NomadsGalaxy

How did we get here?
So, for anyone following along the Prusawire project, you may know this already, but let's start from the beginning.
I came up with the idea of Prusawire just before Core ONE kits were about to begin shipping. I had just recently

January 5, 2026

4 min

114

6,493

Voxel3D_NL

@Voxel3D

With Bondtech's INDX coming to the Prusa CORE One, multi-nozzle printing is becoming the new standard. But more colours mean more spools... and more chaos on your desk.
Introducing INBXX: The ultimate, fully configurable filament management system de

November 21, 2025

7 min

4,231

VC Design

@VC_Design

I’m incredibly honored to be nominated for the Printables Designer of the Year Award!
If you’ve enjoyed using my models, printed something that helped you, or simply liked my approach to design, I’d truly appreciate your support.
Your vote would mean

December 18, 2025

1 min

570

Black Friday deals are live on Printables! For the entire month, enjoy 30% off a wide selection of paid models from our talented designers.
📅 October 30th – November 30th, 2025🌐 Exclusively on the Printables Store
Time to fire up your 3D printer! 🔥
D

November 4, 2025

1 min

4,397

firstgizmo

@firstgizmo

This is about making an anemometer from scratch, helplessly overengeneering it and having fun with a ton of boring napkin maths needed for this.
Along the following journey i learned a lot about designing and claibrating anemometer. I encountered a

June 16, 2026

8 min

183

Over the past week, a lot of progress happened on the CORE One Mini. While it may not look like a giant leap forward at first glance, this phase involved countless hours of preparation work, experimentation and more than a few unexpected "surprises."

June 7, 2026

8 min

348

Hello everyone! As I mentioned in last week's Reddit update, I finally completed all of the metal parts. The side panels are finished, tested and painted. After completely messing up the first attempt because of incorrect bend radii, the second versi

June 21, 2026

9 min

253

m_collectable

@m_collectable

I really like the 3D printable badges that Printables.com gives for reaching different badge milestones so I printed the ones I achieved. I wanted to share my makes of these badges so putting them in an article seemed liked the best way to do it. To

June 22, 2026

5 min

262

Printables Changelog – February 10, 2026
🚀 New Features & Major Improvements Enhanced Search ExperienceBy default, search results now mix both free and exclusive (Store/Club) models, giving you a complete view of available models. We've also added ha

February 10, 2026

2 min

431

MATARO

@MATARO

The MK3.251 is a printer that combines two MK3 series printers. The housing was made using two MK3 aluminum frames and a 3030 aluminum frame. The tool head is the same as the MK3S. Other new parts needed are two extended 8mm shafts and belts for the

March 10, 2026

1 min

527

MZ4250

@MZ4250

Here's my Owlbear Enjoying Honey mini printed by one of my patrons! Woo!

June 5, 2026

1 min

276

Sillybutts

@Sillybutts

Thank you so much EVERYONE for the huge amount of support! I never imagined that I would be in the running for an award this big, ITS AMAZING! Vote for finalists now: https://www.printables.com/awards/2025

January 8, 2026

1 min

394

Time for another update on the CORE One Mini - and this one once again feels like a proper milestone. While I skipped ahead a bit earlier to work on the CoreXY assembly and the heatbed assembly, it’s now time to focus on the back assembly, which is m

April 12, 2026

7 min

332

Wekster

@Wekster

Hey everyone!
One day as a kid I went to the newspaper stand to check do they have any new comics for me. At that time we didn't had Marvel or DC stuff, we mostly had Italian published stuff like Dylan Dog, Zagor, Martin Mysteree etc... I know, you n

August 25, 2025

1 min

1,569

This update is a bit different - no single big milestone this time, but rather a collection of smaller improvements, refinements and progress across multiple areas. The kind of work that isn’t always the most exciting to show, but is absolutely essen

April 26, 2026

6 min

393

This update is a bit different from the previous technical ones. Most of the recent work on the CORE One Mini wasn’t about the mechanical side - it was about identity. At some point during a project like this, you realize that if you want the machine

May 24, 2026

6 min

250

3Demon

@3Demon

Kasaka’s Blade is one of those props that looks simple for about five seconds 😅 But once you break the build down into stages, it’s actually really easy to make one yourself.In this post, I will show you how I 3D printed Kasaka’s Blade from Solo Leve

May 14, 2026

6 min

184

Another milestone: the heatbed assembly is now feature complete. This part of the build required quite a few adjustments and customizations, but overall the integration of the components worked out nicely. While the metal parts need another small ite

March 15, 2026

5 min

492

prntmkr

@prntmkr

Recently, I received this amazing award for reaching 100,000 downloads of my models on Printables.What makes this even more special is the thoughtful gesture from the teams at Printables and Prusa. Thank you for recognizing the work of creators and f

June 10, 2026

1 min

111

firstgizmo

@firstgizmo

How it feels to be a first time buyer, how to purchase a printer at Prusa3D and how to get tricked by your long time favorite 3D printer manufacturer .
First of all, I already own and use Prusa printers. They are my daily drivers, my workhorses basic

June 24, 2026

4 min

144

If there is one thing this stage of the CORE One Mini reminded me of, it's this: prototyping is not always fair and square. And in this case, that is meant quite literally.
I spent about a full day cutting each profile to length and making the cutout

February 22, 2026

5 min

433

This week marked another step toward finishing the exterior and material side of the CORE One Mini. The focus shifted toward plastics, fitment refinement, and finalizing the sheet metal and enclosure components.
Some of the originally planned materia

May 10, 2026

5 min

235

Kurt Gluck

@Kg08854_67915

0: Updates (Change Log)
V6 - Updates
Started to flesh out the Infill section
V5 - Updates
Section4 - started to write about infil6-end - inserted a new Secton 6 "Fuzzy Skin" renumbered all the sections after7.2 (was 6.2) added a picture
V4 - Updates

June 30, 2026

14 min

108

MiniWorld3D

@MiniWorld3D

Could AI be integrated responsibly in the 3D model-creating process? Can a model bear the “AI” tag without being immediately dismissed as slop? AI generated 3D models have flooded every repository web platform. You probably have encountered them here

September 11, 2025

6 min

1,327

Martin

@Martin

Greetings everyone. So, I have started to work on this extremely nice Shuttle from the Avatar movies. The Valkyrie Shuttle. After some work, the Base Model is finaly done. The model will be some 60cm long.

September 16, 2025

2 min

280

Another milestone: the CoreXY assembly is done - more or less - which means most of the major components related to the printer’s kinematics are now in place.
The CoreXY plate itself ended up being a bit of a mashup between the CORE One, the Core One

March 29, 2026

5 min

382

Kryštof Kohout

@KrystofK

You can easily create your own custom 3D jigsaw puzzle within PrusaSlicer! This guide includes the whole workflow.
I was inspired to create 3D jigsaw puzzles by this article on Prusa Blog. However, it was originally written in 2019, and I found some

September 4, 2025

5 min

734

Xema

@Xema_4266128

Introduction and Preamble
When I design a kayak, I usually build it at a 1:10 scale in order to get a visual impression of how it looks outside the screen, and, of course, to check certain measurements and volumes. The 1:10 scale provides a much more

June 13, 2026

3 min

376

A lot has happened in the meantime - this is the point where the CORE One Mini project finally left the comfortable world of CAD and stepped into the slightly more painful reality of sparks, sharp edges and metal shavings. Hours were spent on tasks t

February 11, 2026

6 min

375

firstgizmo

@firstgizmo

This article is all about building your lunch box FluidNC pendant. You are going to need your printed parts, soldering iron, screw driver(s) and your sourced parts according to the BOM.The estimated time to first signs of live, is going to be roughly

June 30, 2026

10 min

Kryštof Kohout

@KrystofK

I really love using PrusaSlicer creatively to customize objects or even make new ones. Obviously, the primary purpose of the program is to slice existing models to be printed as accurately as possible to the original 3D file. But, with just a little

August 11, 2025

6 min

641

Thorin Oakenshield

@ThorinOakenshield

300 K downloads!
Today I reached this number of downloads of my 3D models on Printables.com.
When I started on the original Prusaprinters website, I would never have believed it. I have been working on Printables for 4 years, since February 2022, whe

March 15, 2026

2 min

218

3Demon's Texture Rollers

@3Demon_tools_1348681

Spring is one of our favorite seasons for creative projects, and we wanted to capture a bit of that magic in a collection of texture rollers designed for clay, polymer clay, EVA foam, and many other materials.
The collection includes 11 spring-themed

June 16, 2026

2 min

One of the biggest challenges in this iteration turned out to be the back panel. What looks like a simple flat part at first quickly became one of the most constrained areas of the entire build.
Because of the overall size reduction and the tighter f

January 25, 2026

4 min

432

GraFabLab

@GraFabLab

White or Black — which side calls to you?
Pale Granite speaks with calm, carved clarity.
Black Metal strikes with force, forged in shadow.
Your choice sets the tone.
Choose the next collection we design and release first:
Pale Granite Line or Black M

June 30, 2026

1 min

Jerrari

@Jerrari

The idea behind my GEN2 Decor Series was to bring the modular storage system into the home or office, opening up endless possibilities for customization and style. The Chevron Series has always been special to me because it marked my first step away

October 5, 2025

2 min

498