Commercial and Light Industrial Pre-Insulated Pipe Supports (A1000 thru A9000)
For smaller loads and movements. Commonly used on chilled and heated water systems. Most popular with mechanical contractors.
Learn MoreBase Mounted Pre-Insulated Pipe Supports (B1000 thru B8300)
For larger loads (vertical and lateral) and movements. Supports the pipe from below. Commonly used in heavy industrial and large HVAC distribution systems.Slide plates and guides are optional.
Learn MorePipe Anchors (C1000 thru C4300)
For larger multi-directional loads and movements. Supports the pipe from below. Restrains movement of the piping system. Used in heavy industrial and large HVAC applications.
Learn MoreHanger Type Pre-Insulated Pipe Supports (D1000 thru D6300)
For larger loads and movements. Supports the pipe from above (with one or two hanging rods). Used in heavy industrial and large HVAC applications.
Learn MoreInsulated Pipe Riser Clamps (E1000 thru E2300)
For both smaller and larger loads and movements. Supports the pipe in a vertical “riser” configuration. For commercial, light and heavy industrial and large HVAC distribution systems.
Learn MorePipe Clamps, Pipe Guide Straps, Pipe Guide U-Bolts (G1000 thru G3000)
Misc. pipe clamping hardware (typically used in conjunction with Pipe Shields A1000 through A9000 series insulated supports).
Learn MorePT&P Cold Shoes (CS1000 thru CS6000)
A cold shoe is a pipe support used for cryogenic applications where the transfer of cold temps from the pipeline to the surrounding steel pipe rack is not desirable. These supports can be used for temperatures down to -300˚ Fahrenheit.
Learn MorePT&P Hot Shoes (HS1000 thru HS6000)
A hot shoe is a pipe support used for high temperature applications, such as high pressure steam lines or boiler feed water, where heat loss through the pipe support is not desirable. These supports can be used for temperatures up to 1400˚ Fahrenheit.
Learn MoreSelection Guide
| Service | Configuration | Spacing Guide | |
| Water | Support from above | clevis or 2-bolt clamp | View Selection Table 3 |
| Support from below | on a flat surface | View Selection Table 1 | |
| on a pipe roll | View Selection Table 5 | ||
| Steam, gas or air | Support from above | clevis or 2-bolt clamp | View Selection Table 4 |
| Support from below | on a flat surface | View Selection Table 2 | |
| on a pipe roll | View Selection Table 6 | ||
Industries and Applications
telecom
semiconductor
renewables
power
pharma
paper
new construction
manufaturing
building
aviation
refinery
petrochemical
hospitals
automotive
- Field Services
- 24x7 Emergency Service
- FEA & Stress Analysis
- Engineering & Design
- Product Testing
- 3D Printing
Field Services
- Survey, Inspection & Audit
- Assessment, Adjustment & Refurbishment
- Installation & Maintenance
- On-site Project Supervision
24x7 Emergency Service
- Available 24 hours a day, 7 days a week
- Including weekends and holidays
- Guaranteed response within 30 minutes
- Team of experts on stand-by
FEA & Stress Analysis
- Extensive In-House Finite Element Analysis (FEA)
- ProEngineer & ANSYS
- Structural & Special Clamp Analysis
- Wind & Seismic Piping
- Heat Transfer, Flexibility & Fluid Flow Anlaysis
Engineering & Design
- Pipe Support & Product Selection
- Customized Designs
- Expansion Joint Model Selection
- 3D Design & Modeling
- Design Software Integration
- Company Specific Drawing Sets
Product Testing
- Product Design Evaluation
- Quality & Custom Design Testing
- Hydrostatic, Helium & Pneumatic Air
- Dye-Penetrant, Burst & Snubber
- Rod Hanger and Load Testing
3D Printing
- When designing specialty pipe supports or expansion joints, PT&P can provide a 3D print which allows you to to assess the design before it is sent to our shop for manufacturing. Providing you with a 3D printed model will help you have a 360° understanding of the product and its functionality
Choosing the Right Pre-Insulated Pipe Support
May 26, 2026
Many facility owners and engineers assume pre-insulated pipe supports are only necessary for extreme temperature applications such as cryogenic or …Continue Reading
View BlogOnline Courses
Piping Design | Expansion Joints
Upto 8 hours P.E. credits
Piping System Designers | Operations Managers | Field, Maintenance, Process and New Engineers | Surveyors and More
Learn More
Client Testimonials
Procurement Manager
(LNG Project)
"PT&P worked countless hours of overtime, weekends, etc. to support the piping reinforcement exercise and delivered..."
View moreFAQS
Why should I use insulated pipe supports?
The insulated pipe support can save you money on your bid and on the job...
View All FAQS